| Compression Format |
• |
ENGINE-K software compression |
• |
Display and record resolution 768x576, 384x288, 192x144 (PAL) |
• |
1-4 channels video input |
• |
1 channel audio input |
• |
150M/h-200M/h hard disk place |
| Alarm Control |
• |
1-8 channels alarm input / output built-in |
• |
Automatic record when alarm triggered |
• |
Can control automatic record time when alarm is triggered |
• |
Support motion detection and alarm area setable |
• |
Automatic record when motion detection is triggered |
| P/T/Z Control |
• |
RS-422/485 communication interface built-in alarm card |
• |
Support kinds of protocol of decoder (KALATEL, PELCO, PHILIPS, UNIVISION, VICON, etc.) |
| Remote Control |
• |
Can transmit the video and audio signal through LAN, PSTN, ADSL, ISDN, INTERNET etc. |
• |
Support P/T/Z control through the network |
• |
Support IE browsing. Built-in web server |
• |
Replay video and audio signal through network |
| Function |
• |
1-8 channels real time record in ENGINE-K format |
• |
Selectable schedule record, manual record, motion detection record, alarm recor |
• |
Record frames setable |
• |
Record files can be kept at local hard disk, also support moveable hard disk, CDR/W to keep the record files |
• |
Search based data, event, channel. Diff speed F.FW and F.FB |
• |
Support frame capture and electronics zoom in/out |
• |
Support Electronics map and watermark |
| System Request |
• |
OS: Windows 2000/XP |
• |
CPU: P3 800 or higher |
• |
Memory: At least 128M of RAM (256M required for 16 cameras) |
• |
Hard disk: 80GB |
• |
Mother Board: Based on Intel 815/845 chipset or higher |
• |
VGA card: ATI RAGE 128 or higher |
• |
Windows Direct-X8.0 or above |
